Why do we use polarized capacitor?Pulse Plethysmograph HelpAmplifier capacitorsWhy are capacitors with large values are manufactured polarized?Why does capacitor polarity matter?Is it safe to use series polarized capacitors to form non-polarized capacitors to be used for higher rated voltage?Replacement of Tantalum CapacitorUnpolarized Capacitors in place of Polarized onesWhy is this power cable sometimes polarized and sometimes not?Can I use polarized capacitors in a location where they shouldn't be polarized?Non-Polarized Electrolytic Capacitor Replacement
Simulate Bitwise Cyclic Tag
least quadratic residue under GRH: an EXPLICIT bound
Chess with symmetric move-square
Concept of linear mappings are confusing me
What would happen to a modern skyscraper if it rains micro blackholes?
declaring a variable twice in IIFE
Why is the design of haulage companies so “special”?
Motorized valve interfering with button?
How old can references or sources in a thesis be?
What is the offset in a seaplane's hull?
Why don't electron-positron collisions release infinite energy?
Can an x86 CPU running in real mode be considered to be basically an 8086 CPU?
Download, install and reboot computer at night if needed
I’m planning on buying a laser printer but concerned about the life cycle of toner in the machine
How can the DM most effectively choose 1 out of an odd number of players to be targeted by an attack or effect?
What makes Graph invariants so useful/important?
What Brexit solution does the DUP want?
Is there a minimum number of transactions in a block?
LED on same Pin as Toggle Switch, not illuminating
Japan - Plan around max visa duration
I probably found a bug with the sudo apt install function
How do we improve the relationship with a client software team that performs poorly and is becoming less collaborative?
If Manufacturer spice model and Datasheet give different values which should I use?
Is it possible to do 50 km distance without any previous training?
Why do we use polarized capacitor?
Pulse Plethysmograph HelpAmplifier capacitorsWhy are capacitors with large values are manufactured polarized?Why does capacitor polarity matter?Is it safe to use series polarized capacitors to form non-polarized capacitors to be used for higher rated voltage?Replacement of Tantalum CapacitorUnpolarized Capacitors in place of Polarized onesWhy is this power cable sometimes polarized and sometimes not?Can I use polarized capacitors in a location where they shouldn't be polarized?Non-Polarized Electrolytic Capacitor Replacement
.everyoneloves__top-leaderboard:empty,.everyoneloves__mid-leaderboard:empty,.everyoneloves__bot-mid-leaderboard:empty margin-bottom:0;
$begingroup$
I want to know is the polarized capacitor has the advantage that they are used in some circuits?
For example, in a schematic of the BISS001 PIR controller IC, in some places, a polarized capacitor is used and in some places a non-polarized capacitor one.
Can I use a non-polarized capacitor with the same voltage and capacitance instead of these polarizing capacitors?
Reference Docs:
1.BISS001 datasheet
2.HC-SR501 PIR MOTION DETECTOR datasheet
3.Grove - PIR Motion Sensor or EasyEDA link
What I've understand from your answers is why the electrolytic capacitors are used, and why these are polarized.
But the designers of this circuit could have used a non-polarized capacitor or even polarized tantalum capacitors. Is it true? As the (Grove - PIR Motion Sensor) module uses polarized tantalum capacitors.
I want to know is the polarized capacitors are being used for circuit protection or is there any other reason(Regardless of the type of capacitor)?
Is there a problem if these capacitors are replaced with non-polarized capacitors in this circuits?
capacitor circuit-design polarity
edited 9 mins ago
Community♦
1
asked 7 hours ago
hamid mousavihamid mousavi
112
New contributor
hamid mousavi is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
$endgroup$
add a comment |
$begingroup$
I want to know is the polarized capacitor has the advantage that they are used in some circuits?
For example, in a schematic of the BISS001 PIR controller IC, in some places, a polarized capacitor is used and in some places a non-polarized capacitor one.
Can I use a non-polarized capacitor with the same voltage and capacitance instead of these polarizing capacitors?
Reference Docs:
1.BISS001 datasheet
2.HC-SR501 PIR MOTION DETECTOR datasheet
3.Grove - PIR Motion Sensor or EasyEDA link
What I've understand from your answers is why the electrolytic capacitors are used, and why these are polarized.
But the designers of this circuit could have used a non-polarized capacitor or even polarized tantalum capacitors. Is it true? As the (Grove - PIR Motion Sensor) module uses polarized tantalum capacitors.
I want to know is the polarized capacitors are being used for circuit protection or is there any other reason(Regardless of the type of capacitor)?
Is there a problem if these capacitors are replaced with non-polarized capacitors in this circuits?
capacitor circuit-design polarity
edited 9 mins ago
Community♦
1
asked 7 hours ago
hamid mousavihamid mousavi
112
New contributor
hamid mousavi is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
$endgroup$
$begingroup$
It's not because we want them polarized, but them being polarized is a consequence of how they'r emade.
$endgroup$
– Hearth
7 hours ago
$begingroup$
Compare the prices of electrolytic caps with ceramic (or film) caps in the range of 10uF ~22uF (after taking bias voltage derating into consideration) and you will have one of the reasons.
$endgroup$
– Wesley Lee
6 hours ago
$begingroup$
The very thin oxide layers, providing insulation for a certain polarity, provides a very compact energy storage module. Just view those useful electrolytic capacitors as early versions of self-assembled-nano-tech; the manufacturing process creates the very thin oxide layer: the oxide is GROWN or FORMED.
$endgroup$
– analogsystemsrf
6 hours ago
add a comment |
$begingroup$
I want to know is the polarized capacitor has the advantage that they are used in some circuits?
For example, in a schematic of the BISS001 PIR controller IC, in some places, a polarized capacitor is used and in some places a non-polarized capacitor one.
Can I use a non-polarized capacitor with the same voltage and capacitance instead of these polarizing capacitors?
Reference Docs:
1.BISS001 datasheet
2.HC-SR501 PIR MOTION DETECTOR datasheet
3.Grove - PIR Motion Sensor or EasyEDA link
What I've understand from your answers is why the electrolytic capacitors are used, and why these are polarized.
But the designers of this circuit could have used a non-polarized capacitor or even polarized tantalum capacitors. Is it true? As the (Grove - PIR Motion Sensor) module uses polarized tantalum capacitors.
I want to know is the polarized capacitors are being used for circuit protection or is there any other reason(Regardless of the type of capacitor)?
Is there a problem if these capacitors are replaced with non-polarized capacitors in this circuits?
capacitor circuit-design polarity
edited 9 mins ago
Community♦
1
asked 7 hours ago
hamid mousavihamid mousavi
112
New contributor
hamid mousavi is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
$endgroup$
I want to know is the polarized capacitor has the advantage that they are used in some circuits?
For example, in a schematic of the BISS001 PIR controller IC, in some places, a polarized capacitor is used and in some places a non-polarized capacitor one.
Can I use a non-polarized capacitor with the same voltage and capacitance instead of these polarizing capacitors?
Reference Docs:
1.BISS001 datasheet
2.HC-SR501 PIR MOTION DETECTOR datasheet
3.Grove - PIR Motion Sensor or EasyEDA link
What I've understand from your answers is why the electrolytic capacitors are used, and why these are polarized.
But the designers of this circuit could have used a non-polarized capacitor or even polarized tantalum capacitors. Is it true? As the (Grove - PIR Motion Sensor) module uses polarized tantalum capacitors.
I want to know is the polarized capacitors are being used for circuit protection or is there any other reason(Regardless of the type of capacitor)?
Is there a problem if these capacitors are replaced with non-polarized capacitors in this circuits?
capacitor circuit-design polarity
capacitor circuit-design polarity
edited 9 mins ago
Community♦
1
asked 7 hours ago
hamid mousavihamid mousavi
112
New contributor
hamid mousavi is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
edited 9 mins ago
Community♦
1
asked 7 hours ago
hamid mousavihamid mousavi
112
New contributor
hamid mousavi is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
edited 9 mins ago
Community♦
1
edited 9 mins ago
Community♦
1
edited 9 mins ago
Community♦
1
1
asked 7 hours ago
hamid mousavihamid mousavi
112
New contributor
hamid mousavi is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 7 hours ago
hamid mousavihamid mousavi
112
asked 7 hours ago
hamid mousavihamid mousavi
112
112
New contributor
hamid mousavi is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
hamid mousavi is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
hamid mousavi is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
$begingroup$
It's not because we want them polarized, but them being polarized is a consequence of how they'r emade.
$endgroup$
– Hearth
7 hours ago
$begingroup$
Compare the prices of electrolytic caps with ceramic (or film) caps in the range of 10uF ~22uF (after taking bias voltage derating into consideration) and you will have one of the reasons.
$endgroup$
– Wesley Lee
6 hours ago
$begingroup$
The very thin oxide layers, providing insulation for a certain polarity, provides a very compact energy storage module. Just view those useful electrolytic capacitors as early versions of self-assembled-nano-tech; the manufacturing process creates the very thin oxide layer: the oxide is GROWN or FORMED.
$endgroup$
– analogsystemsrf
6 hours ago
add a comment |
$begingroup$
It's not because we want them polarized, but them being polarized is a consequence of how they'r emade.
$endgroup$
– Hearth
7 hours ago
$begingroup$
Compare the prices of electrolytic caps with ceramic (or film) caps in the range of 10uF ~22uF (after taking bias voltage derating into consideration) and you will have one of the reasons.
$endgroup$
– Wesley Lee
6 hours ago
$begingroup$
The very thin oxide layers, providing insulation for a certain polarity, provides a very compact energy storage module. Just view those useful electrolytic capacitors as early versions of self-assembled-nano-tech; the manufacturing process creates the very thin oxide layer: the oxide is GROWN or FORMED.
$endgroup$
– analogsystemsrf
6 hours ago
$begingroup$
It's not because we want them polarized, but them being polarized is a consequence of how they'r emade.
$endgroup$
– Hearth
7 hours ago
$begingroup$
It's not because we want them polarized, but them being polarized is a consequence of how they'r emade.
$endgroup$
– Hearth
7 hours ago
$begingroup$
Compare the prices of electrolytic caps with ceramic (or film) caps in the range of 10uF ~22uF (after taking bias voltage derating into consideration) and you will have one of the reasons.
$endgroup$
– Wesley Lee
6 hours ago
$begingroup$
Compare the prices of electrolytic caps with ceramic (or film) caps in the range of 10uF ~22uF (after taking bias voltage derating into consideration) and you will have one of the reasons.
$endgroup$
– Wesley Lee
6 hours ago
$begingroup$
The very thin oxide layers, providing insulation for a certain polarity, provides a very compact energy storage module. Just view those useful electrolytic capacitors as early versions of self-assembled-nano-tech; the manufacturing process creates the very thin oxide layer: the oxide is GROWN or FORMED.
$endgroup$
– analogsystemsrf
6 hours ago
$begingroup$
The very thin oxide layers, providing insulation for a certain polarity, provides a very compact energy storage module. Just view those useful electrolytic capacitors as early versions of self-assembled-nano-tech; the manufacturing process creates the very thin oxide layer: the oxide is GROWN or FORMED.
$endgroup$
– analogsystemsrf
6 hours ago
add a comment |
1 Answer
1
active
oldest
votes
$begingroup$
The physical size of a capacitor is a function of the thickness of the dielectric (among other things).
Early on, it was discovered that the oxides of certain metals (aluminum and tantalum in particular) made good dielectrics, and could be made very thin through a chemical process — orders of magnitude thinner than other dielectrics such as waxed/oiled paper and plastic film. Therefore, the electrolytic capacitor was invented to provide high capacitance in a reasonable volume.
Unfortunately, the chemical process requires that the voltage across the capacitor must have only a single polarity, so these capacitors are "polarized". Reversing the polarity degrades and eventually destroys the oxide layer. It's something we just have to live with in order to take advantage of this technology.
The ability to produce high-value capacitors in nonpolarized technologies such as multilayer ceramic means that it is now possible to use them where only a polarized capacitor would have been previously available. There is generally no problem with making this substitution, although you may need to consider some of the quirks of the technology you're switching to.
For example, some high-K (high dielectric constant) ceramics exhibit significant capacitance changes with voltage. This might be acceptable in a coupling or bypass application, but completely unacceptable in a filter design.
answered 6 hours ago
Dave Tweed♦Dave Tweed
123k9152267
$endgroup$
add a comment |
Your Answer
StackExchange.ifUsing("editor", function ()
return StackExchange.using("mathjaxEditing", function ()
StackExchange.MarkdownEditor.creationCallbacks.add(function (editor, postfix)
StackExchange.mathjaxEditing.prepareWmdForMathJax(editor, postfix, [["\$", "\$"]]);
);
);
, "mathjax-editing");
StackExchange.ifUsing("editor", function ()
return StackExchange.using("schematics", function ()
StackExchange.schematics.init();
);
, "cicuitlab");
StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "135"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);
else
createEditor();
);
function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader:
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
,
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);
);
hamid mousavi is a new contributor. Be nice, and check out our Code of Conduct.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2felectronics.stackexchange.com%2fquestions%2f431310%2fwhy-do-we-use-polarized-capacitor%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
$begingroup$
The physical size of a capacitor is a function of the thickness of the dielectric (among other things).
Early on, it was discovered that the oxides of certain metals (aluminum and tantalum in particular) made good dielectrics, and could be made very thin through a chemical process — orders of magnitude thinner than other dielectrics such as waxed/oiled paper and plastic film. Therefore, the electrolytic capacitor was invented to provide high capacitance in a reasonable volume.
Unfortunately, the chemical process requires that the voltage across the capacitor must have only a single polarity, so these capacitors are "polarized". Reversing the polarity degrades and eventually destroys the oxide layer. It's something we just have to live with in order to take advantage of this technology.
The ability to produce high-value capacitors in nonpolarized technologies such as multilayer ceramic means that it is now possible to use them where only a polarized capacitor would have been previously available. There is generally no problem with making this substitution, although you may need to consider some of the quirks of the technology you're switching to.
For example, some high-K (high dielectric constant) ceramics exhibit significant capacitance changes with voltage. This might be acceptable in a coupling or bypass application, but completely unacceptable in a filter design.
answered 6 hours ago
Dave Tweed♦Dave Tweed
123k9152267
$endgroup$
add a comment |
$begingroup$
The physical size of a capacitor is a function of the thickness of the dielectric (among other things).
Early on, it was discovered that the oxides of certain metals (aluminum and tantalum in particular) made good dielectrics, and could be made very thin through a chemical process — orders of magnitude thinner than other dielectrics such as waxed/oiled paper and plastic film. Therefore, the electrolytic capacitor was invented to provide high capacitance in a reasonable volume.
Unfortunately, the chemical process requires that the voltage across the capacitor must have only a single polarity, so these capacitors are "polarized". Reversing the polarity degrades and eventually destroys the oxide layer. It's something we just have to live with in order to take advantage of this technology.
The ability to produce high-value capacitors in nonpolarized technologies such as multilayer ceramic means that it is now possible to use them where only a polarized capacitor would have been previously available. There is generally no problem with making this substitution, although you may need to consider some of the quirks of the technology you're switching to.
For example, some high-K (high dielectric constant) ceramics exhibit significant capacitance changes with voltage. This might be acceptable in a coupling or bypass application, but completely unacceptable in a filter design.
answered 6 hours ago
Dave Tweed♦Dave Tweed
123k9152267
$endgroup$
add a comment |
$begingroup$
The physical size of a capacitor is a function of the thickness of the dielectric (among other things).
Early on, it was discovered that the oxides of certain metals (aluminum and tantalum in particular) made good dielectrics, and could be made very thin through a chemical process — orders of magnitude thinner than other dielectrics such as waxed/oiled paper and plastic film. Therefore, the electrolytic capacitor was invented to provide high capacitance in a reasonable volume.
Unfortunately, the chemical process requires that the voltage across the capacitor must have only a single polarity, so these capacitors are "polarized". Reversing the polarity degrades and eventually destroys the oxide layer. It's something we just have to live with in order to take advantage of this technology.
The ability to produce high-value capacitors in nonpolarized technologies such as multilayer ceramic means that it is now possible to use them where only a polarized capacitor would have been previously available. There is generally no problem with making this substitution, although you may need to consider some of the quirks of the technology you're switching to.
For example, some high-K (high dielectric constant) ceramics exhibit significant capacitance changes with voltage. This might be acceptable in a coupling or bypass application, but completely unacceptable in a filter design.
answered 6 hours ago
Dave Tweed♦Dave Tweed
123k9152267
$endgroup$
The physical size of a capacitor is a function of the thickness of the dielectric (among other things).
Early on, it was discovered that the oxides of certain metals (aluminum and tantalum in particular) made good dielectrics, and could be made very thin through a chemical process — orders of magnitude thinner than other dielectrics such as waxed/oiled paper and plastic film. Therefore, the electrolytic capacitor was invented to provide high capacitance in a reasonable volume.
Unfortunately, the chemical process requires that the voltage across the capacitor must have only a single polarity, so these capacitors are "polarized". Reversing the polarity degrades and eventually destroys the oxide layer. It's something we just have to live with in order to take advantage of this technology.
The ability to produce high-value capacitors in nonpolarized technologies such as multilayer ceramic means that it is now possible to use them where only a polarized capacitor would have been previously available. There is generally no problem with making this substitution, although you may need to consider some of the quirks of the technology you're switching to.
For example, some high-K (high dielectric constant) ceramics exhibit significant capacitance changes with voltage. This might be acceptable in a coupling or bypass application, but completely unacceptable in a filter design.
answered 6 hours ago
Dave Tweed♦Dave Tweed
123k9152267
edited 4 hours ago
answered 6 hours ago
Dave Tweed♦Dave Tweed
123k9152267
answered 6 hours ago
Dave Tweed♦Dave Tweed
123k9152267
answered 6 hours ago
Dave Tweed♦Dave Tweed
123k9152267
123k9152267
add a comment |
add a comment |
hamid mousavi is a new contributor. Be nice, and check out our Code of Conduct.
hamid mousavi is a new contributor. Be nice, and check out our Code of Conduct.
hamid mousavi is a new contributor. Be nice, and check out our Code of Conduct.
hamid mousavi is a new contributor. Be nice, and check out our Code of Conduct.
Thanks for contributing an answer to Electrical Engineering Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
Use MathJax to format equations. MathJax reference.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2felectronics.stackexchange.com%2fquestions%2f431310%2fwhy-do-we-use-polarized-capacitor%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
$begingroup$
It's not because we want them polarized, but them being polarized is a consequence of how they'r emade.
$endgroup$
– Hearth
7 hours ago
$begingroup$
Compare the prices of electrolytic caps with ceramic (or film) caps in the range of 10uF ~22uF (after taking bias voltage derating into consideration) and you will have one of the reasons.
$endgroup$
– Wesley Lee
6 hours ago
$begingroup$
The very thin oxide layers, providing insulation for a certain polarity, provides a very compact energy storage module. Just view those useful electrolytic capacitors as early versions of self-assembled-nano-tech; the manufacturing process creates the very thin oxide layer: the oxide is GROWN or FORMED.
$endgroup$
– analogsystemsrf
6 hours ago